EZshoot Bore Sight 223 5.56mm Red Dot Laser Boresighter with Batteries

About 223 5.56mm Red Bore Sight

• Class IIIA laser, less than 5mW.
• Made to fit the .223 chamber, caliber specific.
• Comes with 2 set batteries (3 AG3 batteries) which can last one and half an hour.
• Easy to sit perfectly in the bore; Sturdy brass construction.
• High accuracy, sighting range is 15 to 100 yards.

Laser Boresighter Specification

Length: 44.5mm; Tail width: 9.5mm; Head width: 6.3mm

Laser Wave length (nm:) 640 to 660

LED Type: visible red laser

Power: <5 mW

Construction: Brass

Sighting Range: 15 to 100 yards

Dot Size: 2 inches at 100 yards

Temperature: -10℃ to 40℃

Operation: On/Off End Cap

Battery Type:6 X AG3 (Included)

How to use the bore sight?

1. Unscrew the back cap from the bore sight by turning counter clockwise

2. Stand the bore sight on a flat surface with the laser side pointing down

3. Insert batteries (+ side up) inside the rear opening

4. Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on)

5. Place in your rifle’s chamber and close the bolt

6. To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle’s barrel upward (always practicing safe firearm practices)

7.Unscrew the back and remove the batteries to turn the unit off

Package included

1 x Bore Sight

6 x AG3/LR41 Batteries