EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries

EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries

Regular price $17.99
Unit price  per 

  • Class IIIA laser, less than 5mW
  • Made to fit the 9mm chamber, caliber specific.
  • Comes with 1 set batteries (3 AG3 batteries) which can last one and half an hour.
  • Easy to sit perfectly in the bore; Sturdy brass construction.
  • High accuracy to reduce cartridges and shells wasted, sighting range of the bore sight is 15 to 100 yards

 

Specification:
Length: 33mm; Tail width: 8.5mm; Head width: 8.6mm
Laser Wave length (nm:) 640 to 660
LED Type: visible red laser
Power: <5 mW
Construction: Brass
Sighting Range: 15 to 100 yards
Operation: On/Off End Cap
Temperature: -10℃ to 40℃
Battery Type:3 X AG3 (Included)

How to use the bore sight?
1.Unscrew the back cap from the bore sight by turning counter clockwise
2.Stand the bore sight on a flat surface with the laser side pointing down
3.Insert batteries (+ side up) inside the rear opening
4.Carefully push down and turn the screw cap clockwise to tighten the cap (the laser is now on)
5.Place in your rifle’s chamber and close the bolt
6.To remove - open the bolt if it does not automatically extract, manually remove the unit by tilting the rifle’s barrel upward (always practicing safe firearm practices)
7.Unscrew the back and remove the batteries to turn the unit off

Package included
-- 1 X Bore Sight
-- 3 X AG3 Battery